PowerDesigner使用：[1]Name首字母生成Code

1、主菜单Tools->General Options->Dialog-> Name to Code mirroring,勾上（默认是勾上的）。

2、主菜单Tools->Model Options-> Naming Convention项(设置该项,会影响所有的子节点).勾选" Enable name/code conversions".

3、在Name To Code标签页输入以下脚本即可..vbscript(%Name%拘七呷憎) ScriptResult=getpy(ScriptInputArray(0)) functio荏鱿胫协n getpychar(char) tmp=65536+asc(char) if(tmp>=45217 and tmp<=45252) then getpychar= "A" elseif(tmp>=45253 and tmp<=45760) then getpychar= "B" elseif(tmp>=45761 and tmp<=46317) then getpychar= "C" elseif(tmp>=46318 and tmp<=46825) then getpychar= "D" elseif(tmp>=46826 and tmp<=47009) then getpychar= "E" elseif(tmp>=47010 and tmp<=47296) then getpychar= "F" elseif(tmp>=47297 and tmp<=47613) then getpychar= "G" elseif(tmp>=47614 and tmp<=48118) then getpychar= "H" elseif(tmp>=48119 and tmp<=49061) then getpychar= "J" elseif(tmp>=49062 and tmp<=49323) then getpychar= "K" elseif(tmp>=49324 and tmp<=49895) then getpychar= "L" elseif(tmp>=49896 and tmp<=50370) then getpychar= "M" elseif(tmp>=50371 and tmp<=50613) then getpychar= "N" elseif(tmp>=50614 and tmp<=50621) then getpychar= "O" elseif(tmp>=50622 and tmp<=50905) then getpychar= "P" elseif(tmp>=50906 and tmp<=51386) then getpychar= "Q" elseif(tmp>=51387 and tmp<=51445) then getpychar= "R" elseif(tmp>=51446 and tmp<=52217) then getpychar= "S" elseif(tmp>=52218 and tmp<=52697) then getpychar= "T" elseif(tmp>=52698 and tmp<=52979) then getpychar= "W" elseif(tmp>=52980 and tmp<=53640) then getpychar= "X" elseif(tmp>=53689 and tmp<=54480) then getpychar= "Y" elseif(tmp>=54481 and tmp<=62289) then getpychar= "Z" else '如果不是中文，则不处理 getpychar=char end if end function function getpy(str) for i=1 to len(str) getpy=getpy&getpychar(mid(str,i,1)) next end function.endvbscript

4、如果想更改原来的设置，勾上Apply Name To Code Conversion->To All Objects即可，这样就会把所有对象的Code根据Name首字母重新生成。效果如下