华为路由器AR28-11固定IP接入配置E0作为WAN口

1、======配置DNS======

[Quidway] DNS resolve
[Quidway] DNS server 202.96.209.5
[Quidway] DNS server 202.96.209.133

2、======配置内网DHCP 地址池======

[Quidway] dhcp enable     开启DHCP服务
[Quidway] dhcp server forbidden-ip 10.10.10.1  保留网关IP
[Quidway] dhcp server ip-pool 1
[Quidway-dhcp-pool-1] network 10.10.10.0 mask 255.255.255.0
[Quidway-dhcp-pool-1] gateway-list 10.10.10.1
[Quidway-dhcp-pool-1] dns-list 10.10.10.1         或（202.96.209.5 202.96.209.133）
[Quidway-dhcp-pool-1] domain-name www.pc-mservices.com 这里是主机域名(如果有就置上)没有就随便配一个

3、======配置访问规则======

[Quidway] acl number 2000
[Quidway-acl-basic-2000] rule 0 permit source 10.10.10.0 0.0.0.255
[Quidway-acl-basic-2000] rule 1 deny  拒绝其他

4、======配置WAN 外网======

[Quidway] interface Ethernet0/0
[Quidway-Ethernet0/0] ip address 192.168.0.185 255.255.252.0
[Quidway-Ethernet0/0] nat outbound 2000
[Quidway-Ethernet0/0] nat server protocol tcp global 192.168.0.185 any inside 10.10.10.1 any

5、======配置LAN内网======

[Quidway] interface Ethernet0/1
[Quidway-Ethernet0/0] ip address 10.10.10.1 255.255.255.0

6、======配置一条静态路由=====

[Quidway] ip route-static 0.0.0.0 0.0.0.0 192.168.1.1 preference 60

7、保存配置重启路由。这样就完成了整个配置